Back

 

PHOTOGRAPH AND SCHEMATIC DRAWING

CostGardTM Condensate Drain Seal   MODEL P1525

 

 

 

The seal consists of three parts, identified in Figure 1 as Parts A, B, and C. These parts provide versatility in installation.  For example, by rotating Part C in Part A, the discharge port Part B can be pointed in the desired direction. Part B can be rotated up to 60 degrees to allow piping alignment.

 

The dimensions and characteristics of the four production models are listed in the following Table. Installation of the CostGard™ Condensate Drain Seal is quite simple.  Installation instructions are included with each unit shipped. Installation Instructions

Production CostGardTM Condensate drain seal

P1525 Models for Units

with Cooling Capacities up to 30 Tons

Maximum

Negative DRAIN PAN PRESSURE

Model

number

Depth

Of Drain seal

LENGTH

DRAIN

Diameter

1.5 in. wc

1525-77-56

5.5 in.

7.5 in

.75 in.

1.5 in. wc

1525-71-56

5.5 in.

7.5 in

.75 in.

1.5 in. wc

1525-11-56

5.5 in.

7.5 in

1.0 in.

1.5 in. wc

1525-17-56

5.5 in.

7.5 in

1.0 in.

Back